|
C5 Chrome Accessories |
Page
1 |
2 |
3 |
4 | 5
| 6 |
7 |
8 |
|
Click on image to enlarge |
Use your browsers "Back"
button to return to this page |
|
To order, phone 804-763-6288.
We accept VISA, MasterCard, money orders and checks |
 |
|
 |
50133 - DOOR STRIKERS (PAIR) $139.00
These are brand new factory original sreikers,
"show quality" triple chrome plated for a show winning look.
Chrome replacement bolts are included. You can use our chrome
Door Supports, item # 50131 to go along with the strikers. Installation
time is about 15 minutes. Fits 1997-2004.
INSTALLATION INSTRUCTIONS
1. Remove the two bolts from the existing striker and remove striker.
2. Replace with chrome striker and chrome replacement bolts. |
|
|
 |
50134 - CHROME UPPER RADIATOR SUPPORT
$535.00
This is a factory original plastic part that has gone through our special "show quality" triple chrome plating process. This piece along with the chrome Air Duct, item # 50138 puts your engine compartment way above your competitors. This is an eye popping look. Installation time is about 30 minutes. Fits 1997-2004.
INSTALLATION INSTRUCTIONS
1. Remove air duct and four bolts holding support and remove support.
2. Install chrome support in reverse procedure. |
|
|
 |
50135 - CHROME FRONT BUMPER INSERT $164.00
This piece is fabricated
from laser cut 16 ga. steel and "show quality" triple chrome plated
....... THIS IS NOT THIN STAINLESS. You can use our Front Bumper Chrome Bolt Kit , item # 50117 for a finished look. Installs in about 15 minutes. Fits 1997-2004?
INSTALLATION INSTRUCTIONS
Remove the six push pins from front bumper. Position chrome insert
and reinstall the six push pins or order our matching chrome bolt
and washer kit, item # 50117 for a finished look.
|
|
|
 |
50136 - CHROME DOOR HANDLES (pr) $569.00
These factory original door handles are disasembled, "show quality" triple chrome plated and reassembled for a very expensive, elegant look. For the owner that want an extra special look that not every one has. Installation time is about 90 minutes. Fits 1997-1999 and 2000-2004.
INSTALLATION INSTRUCTIONS
Remove your door handles and replace with our Chrome Door Handles as per shop manual.
|
|
|
 |
50137 - CHROME COWL INSERT $184.00
This two piece part is
fabricated from laser cut 16 ga. steel and "show quality" triple
chrome plated. It has beautifully proportioned slots for the hvac
air intake.They also match the slots in our new chrome Battery Den Cover, item # 50160. You can use our Cowl Chrome Bolt Kit, item # 50118 to finish the look. Installation time is about 15-20 minutes Fits 1997-2004.?
INSTALLATION INSTRUCTIONS
Remove the five push pins from the cowl and then position the cowl
insert on the?cowl and reinstall the five push pins or order our
matching chrome bolt and washer kit Item # 50118 for a finished
look.
|
|
|
 |
50138 - CHROME AIR DUCT
$379.00
We turn your stock air duct into a show quality triple
plated master piece. This is a piece that you absolutely have to have. It makes the engine compartment along with the Chrome Radiator Support, item # 50134. Send us your original air duct
and we will "show quality" triple chrome plate it for you with a quick turn around. Instalation is about 30 minutes. Fits 1997-2004.
?
INSTALLATION INSTRUCTIONS
1. Remove your existing air duct by unscrewing the worm clamps on the rubber accordian air duct coupler where it attaches to the throttle body and where it attaches to the mass air flow sensor.
2. Gently rock the air duct back and forth while lifting the air duct straight up and working the rubber connectors off of the throttle body and mass air flow sensor. The air duct will slip off of the two rubber grommets holding it to the radiator support.
3. Once the air duct is off the car, remove the rubber accordian coupler from the duct.
4. Replace with your Chrome Air Duct following the above procedures in reverse. |
|
|
 |
50139 DOOR
BEZELS $439.00
Special
Order
These are factory original plastic
inside door bezels that have gone through our special plastic plating process. They are now finished in "show quality" chrome for the exquisite
touch that no one else has. Installation time is about 15 minutes per side. Fits 1997-2004.
INSTALLATION INSTRUCTIONS
These are easy to install. Follow our included instructions.
|
|
|
 |
50141 - HOOD ADJUSTMENT BOLTS $108.00
This kit consists of all four of the Hood Adjustment Bolts, four nuts and four rubber bumpers. These are brand new factory original bolts that have been triple chrome plated. If you have chrome hinges or chrome safety hood stops these will give them a finished, professional look. If you don't have the chrome hinges or stops yet, these will really accent your factory black parts. Don't forget, it's the attention to small details that make a show winner!!! Installation time is about 20 minutes. Fits 1997-2004
INSTALLATION INSTRUCTIONS
1. Count the threads on each Hood Adjustment Bolt above the nut.
2. Loosen the nut with a wrench 1 turn and unscrew the bolt from the hinge or safety stop with your fingers.
3. Adjust the nut on the Chrome Hood Adjustment Bolt so the same amount of threads
are above the nut as were on the original bolt.
4. Screw the Chrome Hood Adjustment Bolt into the hinge or safety stop until the nut makes contact with the surface, then tighten the nut with a wrench.
5. Repeat the above procedure with the 3 remaining bolts
|
|
|
 |
50144 - CHROME WHEEL WELL COVERS (pr) $349.00
Fabricated from laser cut 18 ga. steel, meticulously hand formed to
fit the curvature of the fender well then "show quality"triple chrome plated for
an award winning look. Installation time is about 10 minutes. Fits 1997-2004.
INSTALLATION INSTRUCTIONS
Clean the tops of the wheel wells with denatured alcohol to remove any silicone products that may have been previously applied. 1. Trial fit either the driver side or the passenger side Chrome Wheel Well Cover by simply laying it over your wheel well starting at the front of the wheel well and laying it down towards the rear.. The outer edge should fit tight against the inside of the fender.
2. When you are satisfied with the way it looks and fits, remove the cover and peel the protective film from the Velcro strips ( DO NOT SEPERATE THE VELCRO HALVES ) ,now reinstall the cover as you did in the trial fit.
3. Press down on the cover with your hand and a towel in the areas of the Velcro strips to make sure the adhesive on the Velcro makes good contact with your wheel well and adheres properly.
4. Install the second cover following the apove procedure. Do not remove the covers for 24 hours to give the Velcro adhesive time to cure.
? |
|
|
| ? |
Page
1 |
2 |
3 |
4 | 5
| 6 |
7 |
8 |
|
To order, phone 804-763-6288.
We accept VISA, MasterCard, money orders and checks
and remember...CHROME WINS!!!
|
|
Tip: For best
appearance and long life always keep a good coat of wax on all chrome
parts.
DISCLAIMER ..... User accepts any and all liabilities resulting from the use of Creative Engine Covers, Inc. products. Creative Engine Covers, Inc. is not liable for damage to property or injury to persons resulting from the use of our products.
|
